Installation of USBDM for Windows

Under Windows, installation is done with a standard Windows MSI file USBDM_X_X_X_X_Win.msi.
Download from: USBDM Sourceforge
Note that there is a separate installation for the device drivers and you must select the version appropriate to your operating system see USB Driver Installation.

The USBDM installation will do the following:

Install stand-alone programmers for various targets
- Kinetis
- Coldfire V1
- Coldfire V2,3,4
- MC56F80xx
- HCS08
- HCS12
- RS08
Install various utilities to support USBDM
- BDM firmware updater
- JS16 Bootloader
- TCL interpreter
- Coldfire V2,3,4 Unlocker
- MC56F80xx Unlocker
- JB16 Setboot utility
- GDB Servers
Install documentation and Examples
Modify various other applications that USBDM is designed to work with. These applications need to be installed before USBDM.
Note : It may be necessary to re-install the USBDM software if Codewarrior is updated or re-installed as USBDM modified files may be replaced.
- CodeWarrior for Coldfire V7.2
- CodeWarrior for DSC56800E V8.3
- CodeWarrior Development Studio for S12(X) V5.1
- CodeWarrior Development Studio for Microcontrollers V6.3
- CW for MCU v10.1/v10.2/v10.3
- Eclipse Juno, Kepler or Luna (need to manually select the installation directory)
- Kinetis Design Studio
- FreeMASTER V1.3
- CF Flasher V3.1

Installation of USBDM for Linux

Under Linux, installation is done by standard Debian archive. This will do the following:

Install shared files to /usr/share/usbdm
Install executables to /usr/bin
Install shared libraries to /usr/lib/i386-linux-gnu/usbdm or /usr/lib/x86-linux-gnu/usbdm
Modify the /etc/udev/rules.d file to allow use of the USBDM hardware as a USB device.
Various GUI desktop icons are created for the programmers and GDB servers.
Modify various other applications that USBDM is designed to work with. These applications need to be installed before USBDM.
- CW for MCU v10.1/v10.2
- Eclipse
- Kinetis Design Studio
A .usbdm directory will be created in the user's root directory when any programs are run.

Various programs are then available in the installation directory.

Stand-alone programmers for various targets
- Kinetis
- Coldfire V1
- Coldfire V2,3,4
- MC56F80xx
- HCS08
- HCS12
- RS08
Various utilities to support USBDM
- BDM firmware updater
- JS16 Bootloader
- TCL interpreter
- Coldfire V2,3,4 Unlocker
- MC56F80xx Unlocker
- JB16 Setboot utility
Documention and Examples